Eladóvá vált egy Dynaudio M3A típusú hangfal pár, amely a törökbálinti SuperSize Stúdióban volt használva. A termékkel együtt csomagban megvásárolható a meghajtásukra használt Martin Audio MA 2.8Q típusú erősítő is. A 4 csatornás végfokkal, mi egy pár Dynaudiot és egy pár ns10-et hajtottuk meg. Csomag árért kérem üzenetben érdeklődjön.
A termék megtekinthető előzetes egyeztetés alapján a törökbálinti SuperSize Recordingban.
További képek:
https://drive.google.com/drive/folders/1W5aGpwJCpuUeEgDoHU0eFOyCPCbRbT6R?usp=share_link
A termékről bővebben:
The Dynaudio M3A is an passive, 3 way main-monitor designed for medium-sized rooms.
Designed for continuous high power operation in a correctly constructed acoustic space, the M3 represents the fruit of a research and development program aimed at elevating main monitors above the realm of modified PA speakers. A pair of 300mm bass drivers are perfectly complemented by two 150mm piston midrange drivers employing massive 75mm coils. High frequencies are accommodated by a high power version of the 28mm Esotec T-330 DA dome tweeter, which enjoys a reputation as the finest dome tweeter available. All drivers are ferrofluid cooled, a benefit only made possible on low frequency drivers by the use of custom designed ferrofluid compounds applied to very tightly tolerated voice coil gabs a feature absolutely unique to Dynaudio Acoustics.
The result is a very clean, dynamic and powerful speaker in which common problems, such as cone break up, thermal compression and phase misalignment have been almost eliminated. Frequency response is full and flat, and the overall transparency of sound leaves no doubt that the M3 truly advances the art of monitoring at high levels without sacrificing quality at more relaxing volume.
Levels from 85 to 120dBA exhibit essentially identical timbre allowing total confidence in mix decisions regardless of monitoring level.
Features
Unique linear phase and frequency response
Every monitor matched to any other monitor within ± 1.5dB
28mm ESOTAR soft dome tweeter with aluminum voice coil
Dual 150mm magnesium silicate impregnated polypropylene (MSP) midrange drivers with 75mm voice coils
Dual 300mm polypropylene bass drivers with exceptionally large 100mm aluminum voice coils, offering dramatic improvements in power handling, bass response and distortion figures over conventional systems
Gold plated professional binding posts accepting heavy-gauge speaker cable
Heavy internal damping for minimum cabinet resonance
Thermal protection of the tweeter
Active-ready (requires external 2-way active crossover and 2 channels of amplification pr. Speaker)
Specifications
Model M3A
System 3-way Passive Main Monitor
Frequency Response
(+/- 3 dB) 30 Hz - 20 kHz
Peak SPL 1m, pair
(IEC Short Term) > 129 dB peak
Peak SPL 2m, 5.1
(IEC Short Term) > 130.5 dB peak
Amplifier minimum
2x100 W (> 140 dB SPL @ 2.5m)
Sensitivity (2.83 V/1m)
90 dB
Impedance, Nominal
4 ohm (LF & Mid/High)
Impedance, HF (200 kHz)
5.9 ohm
Resonance Frequency
38 Hz
Internal Cabinet Volume
145 liters
Bass Principle
Bass reflex
Crossover Frequencies
250/3700 Hz
Crossover Slope
Woofer/Midrange 24 dB/oct; Mid/Tweeter 18 dB/oct
Active ready
Requires external active 2-way crossover & 2 channels of amplification
Tweeter
Esotec 28 mm soft dome Magnetic fluid, Rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front
Midrange
15 cm with 75 mm pure alu wire voice coil, One-piece molded polypropylene cone
Woofer
30 cm with 100 mm pure alu wire voice coil, One-piece molded polypropylene cone
Weight 55 kg
Dimensions (WxHxL) 555 x 775 x 505 mm.
