Jump to content

macprovideo: Studio Concepts 501 Gear and the Physics of Sound


Recommended Posts



These days more and more people are recording at home instead of going to professional studios. The technology involved has become so accessible that almost anyone can start up their own studio. While this means that there's more music out there than ever, it also means there's a lot more poorly produced music floating around. It's not enough to simply have the required equipment. You need to know how to use it!

The purpose of this course is to help you get a solid grounding in audio engineering and sound recording. You will learn the fundamentals of sound engineering that are crucial to your success in the studio. Understanding the physics of sound and how to properly use things like compression will make all the difference in your recordings.

In this course, Jim Pavett will give you a detailed overview on every aspect of the recording process, with hands on projects covering how to set up your monitors, how to handle phase issues, and how to properly place microphones. Although there is some theory involved everything is well explained, complete with hundreds of helpful visuals. Jim will take you through a complete journey of the fundamentals of audio recording.

Throughout the course, Jim also gives opportunities for you to get out of your seat and get involved. Whether it's figuring out which frequency your hearing tops out at, or moving around the room to figure out the best place to put your monitors, there are tons of practical lessons to try out on your own. If you're starting to put together a studio and are feeling overwhelmed with everything around you, let us help you out by teaching you the fundamentals of audio so you'll never feel like an alien in your own studio again.

Studio Concepts

1. Introduction(02:27)
2. Sound Wave(02:05)
3. Phase(11:15)
4. Things to Do: Phase"" (01:29)
5. Frequency""(02:38)
6. Frequency Response(02:00)
7. Sensitivity(01:40)
8. Sound in it’s Environment(05:17)
9. Reality Check: Sound in it’s E…(01:21)
10. Things To Do: Sound in it’s En…(01:18)
11. The Model of a Recording System(02:47)
12. Reality Check – The Model of a…(00:30)
13. Electronic Theory Basics(01:02)
14. Ohm’s Law""(01:45)
15. Circuit Example 1(01:19)
16. Circuit Example 2(01:18)
17. Circuit Example 3(01:21)
18. Reality Check: Electronic Theory(02:23)
19. Things to Do: Electronic Theory (01:12)
20. Decibels and Meters(04:00)
21. Headroom(01:42)
22. Dynamic Range(01:54)
23. Frequency Response(01:57)
24. Reality Check: Frequency Responsive(00:57)
25. Specifications(03:26)
26. Knowing Your Equipment(03:28)
27. Components of a Console/Equipment(11:34)
28. Things To Do: Signal Routing(03:46)
29. Digital Console(01:53)
30. Compressor / Limiters(05:32)
31. Reality Check: Compressor / Limiter(01:05)
32. Things To Do: Compressor / Limiter(01:11)
33. Expansion / Gate(05:13)
34. Things To Do: Expansion / Gate(01:52)
35. Delay(01:09)
36. Things To Do: Delay(01:39)
37. Flange(01:20)
38. Phase(00:40)
39. Chorus(00:43)
40. Reverb(06:15)
41. Things To Do: Reverb(01:21)
42. Equalizer(04:04)
43. Things To Do: Equalizer (00:46)
44. Studio Monitors(08:07)
45. Microphones (01:12)
46. Dynamic (00:47)
47. Condenser (01:05)
48. Ribbon(01:17)
49. Tube(01:07)
50. Microphone: Transient Response(01:25)
51. Microphone: Patterns(01:30)
52. Cardioid(01:54)
53. Omni(00:39)
54. Bi-directional(00:49)
55. Microphone Impedance and Options(02:30)
56. Microphone Placement(02:57)
57. Microphone Placement: Acoustic Instruments(03:04)
58. Microphone Placement: Electric Guitar(02:26)
59. Microphone Placement: Vocals(01:12)
60. Microphone Placement: Drums(01:20)
61. Things To Do: Microphone Placement(02:24)
62. Electronic Impedance and Levels(02:40)
63. Things To Do: Electronic Impedance(01:54)
64. Cabling and Connectors(05:17)
65. MIDI(01:53)
66. AES/EBU(00:51)
67. S/PDIF(00:33)
68. Toslink(00:22)
69. ADAT(00:31)
70. TDIF(00:23)
71. MADI(00:23)
72. BNC(00:19)
73. SMPTE(00:54)
74. MTC(00:19)
75. USB(00:25)
76. FireWire 1394(00:39)
77. Solder Technique(06:12)
78. Reality Check: Solder Technique(01:24)
79. Patch Bays(01:30)
80. Connection and Configuration(03:30)
81. Reality Check: Patch Bays(01:08)
82. Things To Do: Patch Bays(01:52)
83. Introduction to Digital Audio Theory(01:30)
84. Definition of Digital Audio(01:08)
85. A/D Conversion(06:14)
86. Reality Check: Digital Audio Theory(01:04)
87. Clocking Setups(02:15)
88. Computer Interfaces(02:40)
89. Computers(04:42)
90. Installing Computer Interfaces(01:17)
91. Creating Your Own Studio(02:22)
92. Putting It All Together(01:11)

tudom 10 éves, és semmitmondó, és a mixing engineer ipari szakmunkásképző első hetében lenyomják, de én spec. örültem volna ha valaki belinkeli (remélem nem volt) :D érdekes volt még akkor is ha valamit már tudtam belőle (bár a jóember olvashatna gyorsabban benne :)) cserébe bevágják oldalról fekete-fehérben ) :P link : http://play.macprovideo.com/tse-01-501-studio-concepts-gear-and-physics-of-sound/intro

egyébként csak azért mert ebbe is csak tök véletlen botlottam bele a http://play.macprovideo.com/library/app/studiodesignandconstruction kategóriában van 
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...