Expert Sleepers REASON alá???

[A/D]

A kép egyértelműen ezt mutatja. Az Expert Sleepers Silent Way ezek szerint Reason modul lesz.

 

 

A Silent Wayről elég annyit tudni, hogy gigadurva képességekkel vértezi fel a CV-GATE csatolóval rendelkező szintiket (pl. összes Moog, Korg MS-20 Mini, moduláris cuccok). Ezek: sample pontos triggerek, századhertz pontos hangolás, 16 bit felbontású vezérlés, melyet a DAW tökéletesen latency kompenzál (ellentétben a MIDIvel, ami késik is), aux LFO, envelope generátorok siserehada. A melegvíz óta nem tudunk jobb találmányról, szóval erről minden hardcore szintisnek tudnia kell (a hitspace-ben régóta kapható, csak senkinek nem volt ideje még arra se, hogy felvigye a webshopba, pedig még el is kellene magyarázni). De akik elébe akarnak menni a dolgoknak itt egy video:

 

(Akik rendelkeznek DC csatolt hangkártyával, ők hardver nélkül azonnal elkezdhetik használni a plugint! Ilyen kártyák az RME, MOTU kártyák és az Apogee Symphony IO. Akik nem, nekik szükségük lesz egy hardverre)

 

A videóban pl. három tök különböző szintit fog össze polifón szintinek

 

[xbitz]

kaptunk hozzá teaser-t

[xbitz]

és elérhető:

Silent Way Voice Controller allows you to control your analog synths directly from Reason, in conjunction with a DC-coupled audio interface (see http://expert-sleepers.co.uk/siwacompatibility.html for a partial list of compatible devices) or an Expert Sleepers hardware module (see http://expert-sleepers.co.uk/moduleoverview.html). The functionality of the Rack Extension is much the same as that of the AU/VST version - see http://expert-sleepers.co.uk/silentway.html for details, and download the user manual from http://expert-sleepers.co.uk/downloads.html
 

CONCEPT

The basic idea is that the Voice Controller appears as a software instrument, driven from a Note/Gate CV pair or by MIDI, and outputs audio signals designed to be sent directly to the CV inputs of analog synths, via a suitable interface.

 

Advantages of this approach include
- timing: since the control voltages are generated within the DAW's audio processing environment, they are sample-accurate in time, and free of jitter (in contrast to those generated by hardware MIDI or USB-based devices).
- flexibility: Reason is a fully modular environment, allowing you to create control CVs in a flexible manner very similar to doing so in analog hardware.
- convenience: there's no need to hook up a separate MIDI/CV converter.
 

CALIBRATION

Since audio interfaces vary greatly in terms of the voltages they can produce, the software has no prior knowledge of how to generate a particular voltage e.g. in order to generate the required pitch. Therefore a calibration process is necessary before the Voice Controller can generate pitch CVs. (Note that gate, trigger & velocity CVs can be generated even without calibration, so if you just want e.g. to use the gate CV to output a clock pulse, there's no need to calibrate.) To calibrate, connect the synth's output to an input on your audio interface. In Reason, use a Spider device or similar to split the audio, sending to both to the Voice Controller's calibration input and to a mixer channel (simply so you can hear what it's doing). Connect the Voice Controller's pitch output to the output channel of your audio interface that is connected to your synth's pitch CV input. If using a modular synth, this is best done using just the VCO module, and using a simple waveform (e.g. triangle). If using an old analog synth, you can either simply hold down a key to open the envelope during calibration, or connect up another CV from the Voice Controller's gate output to the synth's gate input - the Voice Controller will then open the gate during calibration. Then, press one of the Voice Controller's calibrate buttons. (See the video to the right for an example of what should happen.)
 

CONNECTIONS

CV Inputs: there is a standard Reason Note/Gate CV pair, which can be used instead of or as well as MIDI note sequencing. Calibration: this is the audio input which needs to receive a signal from your synth during the calibration process. Outputs: there are four audio outputs available, carrying CV signals: Pitch, Gate, Trigger and Velocity.

CV LEGATO

The one parameter of the RE that is not found in the AU/VST version is "CV Legato". This controls what happens when the RE's note CV changes while the gate is held open (e.g. when there is a tie between two steps of the Matrix Sequencer). When CV Legato is off, the effect is the same as playing two MIDI notes non-legato i.e. the trigger will fire, and in fingered portamento modes there will be no portamento. When CV Legato is on, the effect is the same as playing two MIDI notes legato i.e. the trigger will not fire unless retrigger is on, and in fingered portamento modes there will be portamento.

http://shop.propellerheads.se/product/silent-way-voice-controller/